Filter
Top Products
2437
Parameter dir-name: The name of the directory where a log file is saved, a string of 1 to 64
characters.
Description Use the info-center logfile switch-directory command to configure the
directory where a log file is saved. For a device supporting CF partition, the
directory to save a log file is the logfile directory in the second partition (cf1:) of
the storage device. Ensure that the directory is created first before saving a log file
into it.
By default, the directory to save a log file is the logfile directory under the root
directory of the storage device.
Note that this command can be used to manually configure the directory to which
a log file can be saved. The configuration will lose after system restarts or
primary/backup switchover.
Example # Create a directory with the name test under cf root directory.
<Sysname> mkdir test
%Created dir cf:/test.
# Set the directory to save the log file to cf:/test.
<Sysname> system-View
[Sysname] info-center logfile switch-directory cf:/test
info-center loghost
Syntax info-center loghost host-ip [ channel { channel-number | channel-name } facility
local-number ] *
undo info-center loghost host-ip
View System view
Parameter host-ip: The IP address of the log host.
channel: Specifies the channel through which system information can be output
to the log host.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
facility local-number: The logging facility of the log host The value can be local0
to local7 and defaults to local7.
Description Use the
info-center loghost command to specify a log host and to configure
the related parameters.