Filter
Top Products
1936 CHAPTER 127: AAA CONFIGURATION COMMANDS
Example # Display information about all local users.
<Sysname> display local-user
The contents of local user abc:
State: Active
ServiceType: ftp
Idle-cut: Disable
Access-limit: Enable Current AccessNum: 0
Bind location: 2.2.2.2/3/2/255 (NAS/SLOT/SUBSLOT/PORT)
Vlan ID: Disable
IP address: Disable
MAC address: Disable
Password-Aging: Enable(90 day(s))
Password-Length: Enable(10 character(s))
Password-Composition: Enable(1 type(s), 1 character(s) per type)
Total 1 local user(s) matched
domain
Syntax domain isp-name
undo domain isp-name
View System view
Parameter isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that
cannot contain any forward slash (/), colon (:), asterisk (*), question mark (?),
less-than sign (<), greater-than sign (>), or at-sign (@).
Description Use the
domain isp-name command to create an ISP domain and/or enter ISP
domain view.
Use the
domain default command to specify the default ISP domain and enter
ISP domain view.
Table 509 Description on the fields of display local-user
Field Description
State Status of the local user: active or block
ServiceType Service types that the user can use (ftp, lan-access, pad, ssh,
telnet, terminal)
Idle-cut Whether idle cut is enabled
Access-limit Accessing user connection limit
Current AccessNum Number of users currently accessing network services
Bind location Whether bound with a port
VLAN ID VLAN to which the user belongs
IP address IP address of the user
MAC address MAC address of the user
Password-Aging Aging time of the local user password
Password-Length Minimum length of the local user password
Password-Composition Password composition policy of the local user
Total 1 local user(s) matched 1 local user in total