Filter
Top Products
1575
display mpls rsvp-te established
Syntax display mpls rsvp-te established [ interface interface-type interface-number ] [ |
{ begin | include | exclude } regular-expression ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls rsvp-te established command to display information
about RSVP-TE globally or for an interface.
Example # Display RSVP-TE information for interface Ethernet 1/0.
<Sysname> display mpls rsvp-te established interface ethernet 1/0
Interface Ethernet1/0
Token Bucket Rate: 0.00 Peak Data Rate: 0.00
Tunnel Dest: 2.2.2.2 Ingress LSR ID: 3.3.3.3
Local LSP ID: 4 Session Tunnel ID: 4
Next Hop Addr: 80.4.1.1
Upstream Label: 1024 Downstream Label: 3
Table 396 Description on the fields of the display mpls rsvp-te established command
Field Description
Interface Ethernet1/0 RSVP-TE enabled Ethernet interface
Token Bucket rate Token bucket rate, a traffic parameter
Peak Data Rate Peak rate, a traffic parameter
Tunnel Dest Tunnel destination, in the format of X.X.X.X
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X
Local LSP ID Local LSP ID
Session Tunnel ID Session tunnel ID
Next Hop Addr Next hop address, in the format of X.X.X.X
Upstream label Upstream label
Downstream Label Downstream label