Filter
Top Products
1663
Description Use the display mpls static-l2vc command to display information about static
VCs configured on the router.
If you specify an interface, the command displays only information about static
VCs configured on the CE interface.
Example # Display information about all static VCs configured on the router.
<Sysname> display mpls static-l2vc
total connections: 1, 1 up, 0 down
ce-intf state destination tr-label rcv-label tnl-policy
Serial2/0 up 3.3.3.9 100 200 policy1
# Display information about static VCs configured on interface Serial 2/0.
<Sysname> display mpls static-l2vc interface Serial 2/0
***CE-interface : Serial2/0 is up
VC State : up
Destination : 3.3.3.9
Transmit-vpn-label : 100
Receive-vpn-label : 400
Tunnel Policy : policy1
Tunnel Type : lsp
Tunnel ID : 0x226013
l2vpn-family
Syntax l2vpn-family
Table 441 Description on the fields of the display mpls static-l2vc command
Field Description
total connections Statistics about connection, including the total number of connections,
number of connections that are up, and number of connections that
are down
ce-intfe CE interface
State Status of the VC
destination Destination IP address
tr-label Outgoing label
rcv-label Incoming label
tnl-policy Name of the tunneling policy
Table 442 Description on the fields of display mpls static-l2vc interface
Field Description
CE-interface Name of the CE interface
VC State Status of the VC
Destination Destination IP address
Transmit-vpn-label Outgoing label
Receive-vpn-label Incoming label
Tunnel Policy Name of the tunneling policy
Tunnel Type Type of the tunnel
Tunnel ID ID of the tunnel