Filter
Top Products
1719
Example # Define a tunneling policy, specifying that only GRE tunnels can be used and the
number of tunnels for load balancing be 2.
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1] tunnel select-seq gre load-balance-number 2
vpn-instance-capability simple
Syntax vpn-instance-capability simple
undo vpn-instance-capability
View OSPF multi-instance view
Parameter None
Description Use the
vpn-instance-capability simple command to enable
multi-VPN-instance CE.
Use the
undo vpn-instance-capability command to disable the function.
By default, the function is disabled.
Example # Enable multi-VPN-instance CE.
<Sysname> system-view
[Sysname] ospf 100 vpn-instance vpna
[Sysname-ospf-100] vpn-instance-capability simple
vpn-target (VPN instance view)
Syntax vpn-target vpn-target&<1-8> [ both | export-extcommunity |
import-extcommunity ]
undo vpn-target { all | { vpn-target&<1-8> [ both | export-extcommunity |
import-extcommunity ]}
View VPN instance view
Parameter vpn-target&<1-8>: Adds the VPN target extended community attribute to the
import or export VPN target extended community list and specify the VPN target in
the format nn:nn or IP-address:nn. &<1-8> means that you can specify this
argument for up to 8 times.
A VPN target attribute can be of 3 to 21 characters and in either of these two
formats:
■ 16-bit AS number: 32-bit user-defined number. For example, 101:3.
■ 32-bit IP address: 16-bit user-defined number. For example, 192.168.122.15:1.