Filter
Top Products
1032 CHAPTER 73: BGP DEBUGGING COMMANDS
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 100::2
22::22/128(1027)
// Update message information of IPv6 labeled routes
debugging bgp update peer
Syntax debugging bgp update peer { ipv4-address | group-name } [ acl acl-number |
ip-prefix ip-prefix-name ] [ receive | send ] [ verbose ]
undo debugging bgp update peer { ipv4-address | group-name } [ receive | send ] [
verbose ]
View User view
Default Level 1: Monitor level
Parameters ipv4-address: IPv4 peer address.
group-name: Peer group name.
acl acl-number: Filters the output message debugging information with the
specified ACL.
ip-prefix ip-prefix-name: Filters the output message debugging information with
the specified IP prefix list.
receive: Enables/disables the debugging for the received BGP packets.
send: Enables/disables the debugging for the sent BGP packets.
verbose: Displays detailed debugging information.
Description Use the
debugging bgp update peer command to enable BGP update
message debugging for the specified peer/peer group.
Use the
undo debugging bgp update peer command to disable BGP Update
message debugging for the specified peer/peer group.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
Examples For Update message debugging information in different networking
environments, see the related commands.