Filter
Top Products
2689
reset voice fax statistics
Syntax reset voice fax statistics
View User view
Parameter None
Description Use the
reset voice fax statistics command to clear FoIP statistics.
Example # Clear FoIP statistics.
<Sysname> reset voice fax statistics
voip h323-conf tcs-t38
Syntax voip h323-conf tcs-t38
undo voip h323-conf tcs-t38
View Voice view
Parameter None
Description Use the
voip h323-conf tcs-t38 command to enable the voice gateway in H.323
slow-start mode to contain the T.38 capability description in its capability set.
Use the
undo voip h323-conf tcs-t38 command to disable the voice gateway in
H.323 slow-start mode from containing the T.38 capability description in its
capability set.
By default, T.38 capability description is contained.
Because NetMeeting does not support T.38 capability description parsing, you
must disable the voice gateway in H.323 slow-start mode from containing the T.38
capability description in its capability set to interwork with NetMeeting.
n
■ This command has global significance. The execution of this command can
enable all voice entities to contain the T.38 capability description in their
capability sets.
■ Because NetMeeting does not support T.38 capability description parsing, you
must configure the voip h323-conf tcs-t38 command before interworking
with NetMeeting.
■ If interworking with NetMeeting is required for a voice entity, you can disable
fax using the fax baudrate disable command or set the fax mode to a
non-T.38 mode (pcm).