Filter
Top Products
338 CHAPTER 21: BASIC DLSW CONFIGURATION COMMANDS
Description Use the display dlsw circuits command to view the DLSw virtual circuit
information.
The output information of the command helps the user understand the condition
of DLSw virtual circuits.
Example # Display the information of all virtual circuits.
<Sysname> display dlsw circuits
circuit-Id port local-MAC remote-MAC state lifetime
00a2000a 04 0000.1738.6dfd 0000.1722.3435 CONNECTED 10:02:23
display dlsw information
Syntax display dlsw information [ local | ip-address ]
View Any view
Parameter local: Displays the local information about capabilities exchange.
ip-address: Specifies the IP address of the remote peer to display the capabilities
exchange information about.
Description Use the
display dlsw information command to display the DLSw capabilities
exchange information.
The output information of the command helps the user to understand the
condition of a DLSw virtual circuit.
Example # Display DLSw capabilities exchange information.
DLSw: Capabilities of local: 1.1.1.1 Vendor ID (OUI): 00.16.e0
Version number : 2 Release number : 0
Initial Pacing Window: 40 TCP sessions number : 1
Multicast address : None
Version string : 3Com OS software, Version 5.00c01 (Extended
), Release 1205, Standard
Copyright(c) 2004-2007 3Com Corporation and its licensors, All right
s reserved.
Table 33 Description on the fields of the display dlsw circuits command
Field Description
circuit-Id Virtual circuit ID
port Port number used for TCP connection
local-MAC The MAC address of the local peer across the virtual circuit
remote-MAC The MAC address of the remote peer across the virtual circuit
State Connection status.
■ CONNECTED: a TCP connection has been established
■ DISCONNECTED: no TCP connection has been established
■ CONNECTING: a TCP connection is being established
lifetime The length of time for which the virtual circuit has been up