Filter
Top Products
132
MAC AUTHENTICATION
CONFIGURATION COMMANDS
n
MAC authentication is not supported on the fixed layer 2 interface of FIC-4FSW,
DFIC-9FSW and MSR 20 Series Products.
display mac-authentication
Syntax display mac-authentication [ interface interface-list ]
View Any view
Parameter interface interface-list: Specifies an Ethernet port list, in the format of
{ interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 port ranges. A port range
defined without the to interface-type interface-number portion comprises only
one port. With an interface range, the end interface number and the start
interface number must be of the same type and the former must be greater than
the latter.
Description Use the
display mac-authentication command to display global MAC
authentication information or MAC authentication information about specified
ports.
Example # Display global MAC authentication information.
<Sysname> display mac-authentication
MAC address authentication is enabled.
User name format is MAC address, like xxxxxxxxxxxx
Fixed username:mac
Fixed password:not configured
Offline detect period is 300s
Quiet period is 60.
Server response timeout value is 100s
the max allowed user number is 1024 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent Mac User info:
MAC ADDR From Port Port Index
Ethernet1/1 is link-up
MAC address authentication is Enabled
Authenticate success: 0, failed: 0
Current online user number is 0
MAC ADDR Authenticate state AuthIndex