Filter
Top Products
1393
Candidate RP: 12.12.12.9(LoopBack1)
Priority: 0
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Candidate RP: 3.3.3.3(Ethernet1/0)
Priority: 20
HoldTime: 90
Advertisement Interval: 50
Next advertisement scheduled at: 00:00:28
Candidate RP: 5.5.5.5(Ethernet1/1)
Priority: 0
HoldTime: 80
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
display pim claimed-route
Syntax display pim [ vpn-instance vpn-instance-name | all-instance ] claimed-route
[ source-address ]
View Any view
Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
source-address: Displays the information of the unicast route to a particular
multicast source. If you do not provide this argument, this command will display
the information about all unicast routes used by PIM.
Table 335 Description on the fields of the display pim bsr-info command
Field Description
Elected BSR Address Address of the elected BSR
Candidate BSR Address Address of the candidate BSR
Priority BSR priority
Hash mask length Hash mask length for RP selection calculation
State BSR state
Scope Scope of the BSR
Uptime Length of time for which this BSR has been up, in
hours:minutes:seconds
Next BSR message scheduled
at
Length of time in which the BSR will expire, in
hours:minutes:seconds
Candidate RP Address of the C-RP
Priority Priority of the C-RP
HoldTime Timeout time of the C-RP
Advertisement Interval Interval at which the C-RP sends advertisement messages
Next advertisement scheduled
at
Length of time in which the C-RP will send the next
advertisement message, in hours:minutes:seconds