Filter
Top Products
1390 CHAPTER 90: PIM CONFIGURATION COMMANDS
No C-RPs are configured by default.
Note that:
■ If you do not specify a group range for the C-RP, the C-RP will serve all
multicast groups.
■ If you wish a router to be a C-RP for multiple group ranges, you need to include
these multiple group ranges in multiple rules in the ACL corresponding to the
group-policy keyword.
■ If you carry out this command repeatedly on the same interface, the last
configuration will take effect.
Related command: c-bsr (PIM view).
Example # In the public instance configure Ethernet 1/0 to be a C-RP for multicast groups
225.1.0.0/16 and 226.2.0.0/16, with a priority of 10.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 225.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] rule permit source 226.2.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] c-rp ethernet 1/0 group-policy 2000 priority 10
c-rp advertisement-interval (PIM view)
Syntax c-rp advertisement-interval interval
undo c-rp advertisement-interval
View Public instance PIM view, VPN instance PIM view
Parameter interval: C-RP-Adv interval in seconds, with an effective range of 1 to 65,535.
Description Use the
c-rp advertisement-interval command to configure the interval at
which C-RP-Adv messages are sent.
Use the
undo c-rp advertisement-interval command to restore the default
setting.
By default, the C-RP-Adv interval is 60 seconds.
Related command: c-rp (PIM view).
Example # Set the global C-RP-Adv interval to 30 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30