Filter
Top Products
359
Parameter None
Description Use the
reset dlsw reachable-cache command to clear DLSw reachability
information.
Example # Clear the DLSw reachability information.
<Sysname> reset dlsw reachable-cache
reset dlsw tcp
Syntax reset dlsw tcp [ ip-address ]
View User view
Parameter ip-address: IP address of the remote peer.
Description Use the
reset dlsw tcp command to reset the TCP connection between the
DLSw router and a remote peer or all remote peers.
Note that:
■ This command without ip-address resets the TCP connections between the
DLSw router and all current remote peers; otherwise, this command resets the
TCP connection between the DLSw router and the specified remote peer.
■ In the case of a manual configured remote peer, this command disconnects the
current TCP connection, and initiates a new TCP connection request to
establish new TCP connection.
■ In the case of a remote peer dynamically learned, this command disconnects
the current TCP connection and deletes the remote peer.
Example # Reset the TCP connections will all remote peers.
<Sysname> debugging dlsw tcp
<Sysname> reset dlsw tcp
DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted
DLSW_TCP 4.4.4.3:Rebulid tcp with the peer
# Reset the TCP connection with a remote peer with the IP address of 4.4.4.2.
<Sysname> reset dlsw tcp 4.4.4.2
DLSw_TCP 4.4.4.2:The remote peer is learned dynamically ,it will be deleted
Table 38 Description on the fields of the reset dlsw tcp command
Field Description
DLSw_TCP 4.4.4.2:The remote peer is learned
dynamically,it will be deleted
The remote peer 4.4.4.2 was learned
dynamically and will be deleted by
DLSw.
DLSW_TCP 4.4.4.3 : rebuild tcp with the peer The remote peer 4.4.4.3 was manually
configured and therefore the TCP
connection with it will be
reestablished.