Filter
Top Products
1577
display mpls rsvp-te psb-content
Syntax display mpls rsvp-te psb-content ingress-lsr-id lspid tunnel-id egress-lsr-id [ | { begin
| include | exclude } regular-expression ]
View Any view
Parameter ingress-lsr-id: Ingress LSR ID.
lspid: Local LSR ID, in the range 1 to 65,535.
tunnel-id: Tunnel ID, in the range 0 to 65,535.
egress-lsr-id: Egress LSR ID.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls rsvp-te psb-content command to display information
about RSVP-TE PSB.
Example # Display PSB information.
<Sysname> display mpls rsvp-te psb-content 19.19.19.19 1 0 29.29.29.29
The PSB Content:
Tunnel Dest: 29.29.29.29 Session Tunnel ID: 0
Tunnel ExtID: 19.19.19.19
Ingress LSR ID: 19.19.19.19 Local LSP ID: 1
Previous Hop : 101.101.101.1 Next Hop : -----
Incoming / Outgoing Interface: Ethernet1/0 / -----
RSB Count Number of reservation state blocks
Hello Type Sent Type of hellos sent to the neighbor: REQ, ACK, or NONE
Neighbor Hello Extension State of hello extension: enabled or disabled. This field is
displayed only when hello extension is enabled on the interface.
SRefresh Enable State of summary refresh: YES for enabled and NO for disabled
Reliability Enable State of the reliability function: YES for enabled and NO for
disabled
Graceful Restart State Neighbor’s GR status: Not ready, Ready, Restart, or Recovery.
Displayed as --- when not supported by the device.
Restart Time GR restart interval in seconds
Recovery Time GR recovery interval in seconds
Table 397 Description on the fields of the display mpls rsvp-te peer command
Field Description