Filter
Top Products
1680 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
# Display all BGP VPNv4 peer information.
<Sysname> display bgp vpnv4 all peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
1.1.1.1 4 100 51 64 0 2 00:45:16 Established
# Display detailed information about BGP VPNv4 peer 1.1.1.1.
Port Local and remote ports of the BGP session
Configured Settings of the local timers, including the active hold
interval and keepalive interval
Received Received active hold interval
Negotiated Negotiated active hold interval
Peer optional capabilities Optional capabilities of the peer
Peer support bgp multi-protocol
extended
The peer supports multiprotocol extension.
Peer support bgp route refresh
capability
The peer supports route refresh capability.
Address family IPv4 Unicast IPv4 unicast family capability
Received Total number of received messages and the number of
received update messages
Sent Total number of sent messages and the number of sent
update messages
Maximum allowed prefix number Maximum number of routes that the VPN instance
supports
Threshold Threshold value
Minimum time between
advertisement runs
Minimum route advertisement interval
Optional capabilities Local optional capabilities
Route refresh capability has been
enabled
Whether the route refresh capability is supported
Peer Preferred Value Weight for the routes from the peer
Routing policy configured Routing policy configured
Table 449 Description on the fields of the display bgp vpnv4 all peer command
Field Description
Peer IP address of the peer
V Version of BGP that the peer runs
AS AS number
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages waiting to be sent to the peer
Up/Down Duration of the BGP session in the current state
State Status of the peer
Table 448 Description on the fields of the display bgp vpnv4 peer verbose command
Field Description