Filter
Top Products
1290 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS
Description Use the display ospfv3 request-list command to display OSPFv3 link state
request list.
If no process is specified, link state request list information of all OSPFv3 processes
is displayed.
Examples # Display the information of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Interface Eth1/0 Area-ID 0.0.0.1
----------------------------------------------------------------------
Nbr-ID 2.2.2.2
LS-Type LS-ID AdvRouter SeqNum Age
AS-External-LSA 0.0.16.66 2.2.2.2 0x80000001 98
AS-External-LSA 0.0.16.67 2.2.2.2 0x80000001 98
AS-External-LSA 0.0.16.68 2.2.2.2 0x80000001 98
# Display the statistics of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Eth1/0 2.2.2.2 0
display ospfv3 retrans-list
Syntax display ospfv3 [ process-id ] retrans-list [ statistics ]
View Any view
Parameters process-id: OSPFv3 process ID, in the range 1 to 65535.
Table 307 Description on the fields of the display ospfv3 request-list command
Field Description
Interface Interface name
Area-ID Area ID
Nbr-ID Neighbor router ID
LS-Type Type of LSA
LS-ID Link state ID
AdvRouter Advertising router
SeqNum LSA sequence number
Age Age of LSA
Table 308 Description on the fields of the display ospfv3 request-list statistics command
Field Description
Interface Interface name
Neighbor Neighbor router ID
LSA-Count Number of LSAs in the request list