Filter
Top Products
2468 CHAPTER 164: USER INTERFACE CONFIGURATION COMMANDS
redirect return-deal from-terminal
Syntax redirect return-deal from-terminal
undo redirect return-deal from-terminal
View User interface view
Parameter None
Description Use the
redirect return-deal from-telnet command to let the device that
redirects Telnet connection process the carriage returns received from the terminal
(a PC connected to the console port for example), meaning to substitute 0x0d for
0x0d 0x0a and 0x0d 0x00.
Use the
undo redirect return-deal from-terminal command to disable the
device that redirects Telnet connection from processing the carriage returns.
By default, the carriage returns received from the terminal are not processed.
n
■ The redirect commands are supported on the AUX and TTY user interfaces
only.
■ Execute other redirect commands after using the redirect enable command
to enable redirection on the user interface.
Example # Enable the device that redirects Telnet connection to process the carriage returns
received from the terminal.
<Sysname> system-view
[Sysname] user-interface tty 1
[Sysname-ui-tty1] redirect return-deal from-terminal
redirect timeout
Syntax redirect timeout time
undo redirect timeout
View User interface view
Parameter time: Idle timeout in the range 30 to 86400 seconds.
Description Use the
redirect timeout command to set the idle timeout for the redirected
telnet connection. After that, the connection is terminated.
Use the
undo redirect timeout command to allow the system to maintain an
always-on redirected telnet connection.
By default, the idle timeout is 360 seconds.