Filter
Top Products
1567
7 2.1.1.30 Strict Include
8 1.1.1.30 Strict Include
9 9.4.4.4 Strict Include
display isis traffic-eng advertisements
Syntax display isis traffic-eng advertisements [ level-1 | level-1-2 | level-2 ] [ lsp-id lsp-id |
local ] [ process-id | vpn-instance vpn-instance-name ]
View Any view
Parameter level-1: Displays the TE information of IS-IS Level-1 routers.
level-1-2: Displays the TE information of IS-IS Level-1-2 routers.
level-2: Displays the TE information of IS-IS Level-2 routers.
lsp-id lsp-id: Specifies a link state packet ID (LSP ID) to display the TE information
advertised by it. For more information about IS-IS LSP, refer to “IS-IS Configuration
Commands” on page 1037.
local: Displays local TE information.
process-id: Specifies an IS-IS process ID, in the range 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Description Use the
display isis traffic-eng advertisements command to display the
latest TE information advertised by IS-IS TE.
If no IS-IS level is specified, the TE information of IS-IS Level-1-2 routers is
displayed.
Example # Display the latest TE information advertised by IS-IS TE.
<Sysname> display isis traffic-eng advertisements
TE information for ISIS(1)
--------------------------
Level-1 Link State Database
---------------------------
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
0000.0000.0001.00-00* 0x00000001 0x3f57 534 0/0/0
NLPID : IPV4
AREA ADDR : 00.0005
Table 388 Description on the fields of the display explicit-path command
Field Description
Path Name Explicit path name
Path Status Explicit path status