Filter
Top Products
1155
Use the undo rfc1583 compatible command to disable the function.
By default, RFC1583 routing rules are compatible.
On selecting the best route when multiple AS external LSAs describe routes to the
same destination, RFC1583 and RFC2328 have different routing rules.
Examples # Make RFC1583 routing rules compatible.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] rfc1583 compatible
silent-interface (OSPF view)
Syntax silent-interface { all | interface-type interface-number }
undo silent-interface { all | interface-type interface-number }
View OSPF view
Parameters all: Disables all interfaces from sending OSPF packet.
interface-type interface-number: Interface type and interface number.
Description Use the
silent-interface command to disable specified interfaces from sending
any OSPF packet.
Use the
undo silent-interface command to restore the default.
By default, an interface sends OSPF packets.
A disabled interface is a Passive Interface, which cannot send any Hello packet.
To make no routing information obtained by other routers on a network segment,
you can use this command to disable the interface from sending OSPF packets.
Examples # Disable an interface from sending OSPF packets.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] silent-interface serial 2/0
snmp-agent trap enable ospf
Syntax snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit | lsdbapproachoverflow | lsdboverflow | maxagelsa |
nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt |
virifstatechange | viriftxretransmit | virnbrstatechange ] *