Filter
Top Products
1128 CHAPTER 76: OSPF CONFIGURATION COMMANDS
The Router’s Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Retransmit list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 2.2.2.2 80000004 1
Network 12.18.0.1 2.2.2.2 80000003 1
Sum-Net 12.18.1.0 2.2.2.2 80000002 2
display ospf routing
Syntax display ospf [ process-id ] routing [ interface interface-type interface-number ]
[ nexthop nexthop-address ]
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
interface interface-type interface-number: Specifies an interface via which to
display routing information advertised.
nexthop nexthop-address: Displays routing information with the specified next
hop.
Description Use the
display ospf routing command to display routing table information.
If no OSPF process is specified, routing table information of all OSPF processes is
displayed.
Examples # Display OSPF routing table information.
<Sysname> display ospf routing
OSPF Process 1 with Router ID 192.168.1.2
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
192.168.1.0/24 1562 stub 192.168.1.2 192.168.1.2 0.0.0.0
172.16.0.0/16 1563 Inter 192.168.1.1 192.168.1.1 0.0.0.0
Table 275 Description on the fields of the display ospf retrans-queue command
Field Description
The Router’s Neighbor is Router ID Neighbor router ID
Address Neighbor interface IP address
Interface Interface address of the router
Area Area ID
Retrans List Retransmit list
Type LSA type
LinkState ID Link state ID
AdvRouter Router ID of the advertising router
Sequence LSA sequence number
Age LSA age time