Filter
Top Products
581
n
The undefined bits in all the protocols are reserved for other purposes.
calling: The specified number property is for calling numbers.
called: The specified number property is for called numbers.
in: The specified number property is for calling numbers and called numbers in
incoming ISDN calls.
out: The specified number property is for calling numbers and called numbers in
outgoing ISDN calls.
Description Use the
isdn number-property command to set the type and code scheme of
calling or called numbers in incoming or outgoing ISDN calls.
Use the
undo isdn number-property command to restore the default.
By default, the system selects ISDN number type and code scheme depending on
upper layer service.
If the isdn number-property command is configured, the system adopts the
configured ISDN number type and code scheme without considering the upper
layer service.
The following table shows how to set number type and code scheme.
0 0 1 1 0 0 1 Level 2 regional number in private
numbering plan
0 1 0 1 0 0 1 Level 1 regional number in private
numbering plan
0 1 1 1 0 0 1 PISN specific number in private numbering
plan
1 0 0 1 0 0 1 Level 0 regional number in private
numbering plan
Table 100 Types and code schemes of ISDN numbers
Protocol Field (Bit) value Definition
Type Code scheme
8 7 6 5 4 3 2 1
Table 101 Set the type and code scheme of ISDN numbers
Operation Command
Set a number type and code scheme for the called
numbers in incoming calls
isdn number-property
number-property called in
Remove the number type and code scheme for the
called numbers in incoming calls
undo isdn number-property called
in
Set a number type and code scheme for the called
numbers in outgoing calls
isdn number-property
number-property called out
Remove the number type and code scheme for the
called numbers in outgoing calls
undo isdn number-property called
out
Set a number type and code scheme for the calling
numbers in incoming calls
isdn number-property
number-property calling in