Filter
Top Products
1862 CHAPTER 124: DAR CONFIGURATION COMMANDS
protocols, including user-defined01, user-defined02, ..., user-defined10. No
port number is specified for the user-defined protocol at the initial state. It will be
effective only after the port number is specified. At the same time, the dar
protocol-rename command can be used to modify the name of user-defined
protocol.
tcp: Based on TCP.
udp: Based on UDP.
port-value: Port number of protocol, in the range 1 to 65535, which cannot be the
same with the configured port number of other protocols in the DAR feature. Up
to 16 port numbers can be set for each protocol, which are separated with spaces.
range port-min port-max: Set the range of port number, port-min for the
minimum port number, and port-max for the minimum port number . The
difference value between the maximum number and minimum number shall be
smaller than 1000, i.e. port-max - port-min < 1000. The port number of other
application protocols in the DAR feature cannot be within the range.
Table 493 Protocols of pre-defined ports
Protocol name Protocol type Pre-defined port number
BGP TCP/UDP 179
Citrix TCP 1494
Citrix UDP 1604
CUSeeMe TCP 7648, 7649
CUSeeMe UDP 7648, 7649, 24032
DHCP UDP 67, 68
DNS TCP/UDP 53
eDonkey TCP 4662
Exchange TCP 135
Fasttrack TCP 1214
Finger TCP 79
FTP TCP 21
Gnutella TCP 6346, 6347, 6348, 6349, 6355, 5634
Gopher TCP/UDP 70
H323 TCP 1300, 1718, 1719, 1720, 11000-1999
H323 UDP 1300, 1718, 1719, 1720, 11720
HTTP TCP 80
IMAP TCP/UDP 143, 220
IRC TCP/UDP 194
Kerberos TCP/UDP 88, 749
L2TP UDP 1701
LDAP TCP/UDP 389
Mgcp TCP 2427, 2428, 2727
Mgcp UDP 2427, 2727
Napster TCP 6699, 8875, 8888, 7777, 6700, 6666,
6677, 6688, 4444, 5555