Filter
Top Products
1025
// The hold timer expired on BGP peer 2.2.2.2.
debugging bgp update
Syntax debugging bgp update [ acl acl-number | ip-prefix ip-prefix-name] [ receive | send ] [
verbose ]
undo debugging bgp update [ acl acl-number | ip-prefix ip-prefix-name] [ receive |
send ] [ verbose ]
View User view
Default Level 1: Monitor level
Parameters acl acl-number: Specifies an access control list (ACL) for filtering packet
debugging information. The acl-number argument ranges from 2000 to 3999.
ip-prefix ip-prefix-name: Specifies an IP prefix list for filtering the packet
debugging information. ip-prefix-name is a string of 1 to 19 characters.
receive: Enables the debugging for received BGP packets.
send: Enables the debugging for sent BGP packets.
verbose: Displays detailed debugging information.
Description Use the
debugging bgp update command to enable debugging for BGP
Update messages.
Use the
undo debugging bgp update command to disable debugging for BGP
Update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
Table 230 Description on the fields of the debugging bgp update command
Field Description
BGP.xxx BGP instance name
Err/SubEr
Errdata:
Error code/error subcode
Error data
x.x.x.x/xx Destination address/mask
RPM policy failed for policy :
name:xx :
Failed to pass policy xx
INBOUND Inbound policy
tnl id Tunnel ID