Filter
Top Products
1517
display mpls ldp
Syntax display mpls ldp [ all [ verbose ]] [| { begin | exclude | include }
regular-expression ]
View Any view
Parameter all: Displays all LDP information.
verbose: Displays detailed information.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Description Use the
display mpls ldp command to display information about LDP.
If you do not specify any parameter, the command will display all LDP information
in detail.
Related command: mpls ldp (system view), mpls ldp (interface view).
Example # Display all LDP information in detail.
<Sysname> display mpls ldp all verbose
LDP Global Information
---------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : On Recovery Timer : 60 Sec
LDP Instance Information
---------------------------------------------------------------
Instance ID : 0 VPN-Instance :
Instance Status : Active LSR ID : 1.1.1.1
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
Table 369 Description on the fields of the display mpls label command
Field Description
Label alloc state Label allocation status
’.’ means not used ’.’ means that the label is not used
’$’ means used ’$’ means that the label is used
Static Label Static labels
Dynamic Label Dynamic labels