Filter
Top Products
1292 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS
Parameters process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length, in the range 0 to 128.
abr-routes: Specifies to display routes to ABR.
asbr-routes: Specifies to display routes to ASBR.
all: Specifies to display all routes.
statistics: Specifies to display the statistics of OSPFv3 routing table.
Description Use the
display ospfv3 routing command to display OSPFv3 routing table
information.
If no process is specified, routing table information of all OSPFv3 processes is
displayed.
Examples # Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing
E1 - Type 1 external route, IA - Inter area route, I - Intra area route
E2 - Type 2 external route, * - Selected route
OSPFv3 Router with ID (1.1.1.1) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : I Cost : 1
NextHop : directly-connected Interface: Eth1/0
# Display the statistics of OSPFv3 routing table.
<Sysname> display ospfv3 routing statistics
OSPFv3 Router with ID (1.1.1.1) (Process 1)
OSPFv3 Routing Statistics
Intra-area-routes : 1
Inter-area-routes : 0
External-routes : 0
Table 311 Description on the fields of the display ospfv3 routing command
Field Description
Destination Destination network segment
Type Route type
Cost Route cost value
Next-hop Next hop address
Interface Outbound interface
Table 312 Description on the fields of the display ospfv3 routing statistics command
Field Description
Intra-area-routes Number of Intra-area-routes
Inter-area-routes Number of inter-area routes
External-routes Number of external routes