Filter
Top Products
376 CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS
Total packets: 8 , Packets compressed: 5
Link searches: 0 , Search Missed : 1
Bytes saved : 173 , Bytes sent : 598
Decompression:
Total packets: 6 , Packets compressed: 4
Errors : 0
Compression-connections: 16 , Decompression-connections: 16
display fr map-info
Syntax display fr map-info [ interface interface-type { interface-number |
interface-number.subnumber }]
View Any view
Parameter interface interface-type { interface-number | interface-number.subnumber }:
Specifies an interface by its type and number. It can be a main or subinterface. The
interface-type argument is an interface type. The interface-number argument is a
main interface number. The subnumber argument is a subinterface number, in the
range 0 to 1023.
Description Use the
display fr map-info command to display all frame relay address
mappings or the one for the specified interface.
This command displays whether the static address map entries are correct and
whether dynamic address mapping operates normally.
Related command: fr map ip, fr inarp.
Example # Display the frame relay address map table.
Table 44 Description on the fields of the display fr iphc command
Field Description
RTP header compression information Information of RTP header
compression
Information of TCP header compression Information of TCP header
compression
Compression Information of compression
Decompression Information of decompression
Compression-connections Number of most
compression-connection
Total packets Total number of packets
Packets compressed Number of packets compressed
Link searches Times of link search
Search missed Times of search missed
Bytes saved Number of bytes saved
Bytes sent Number of bytes sent
Errors Number of error
Compression-connections: 16
Decompression-connections: 16
The most connection number of
compression and depression