Filter
Top Products
1690 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
Import VPN Targets : 4:4 5:5
Import Route Policy : poly-1
Description : This is vpn1
Maximum number of Routes : 500
Interfaces : Ethernet1/0
display ospf sham-link
Syntax display ospf [ process-id ] sham-link [ area area-id ]
View Any view
Parameter process-id: OSPF process ID, in the range 1 to 65535.
area-id: OSPF area ID. It can be an integer in the range 0 to 4294967295 or in the
format of an IPv4 address.
Description Use the
display ospf sham-link command to display information about sham
links.
With neither process ID nor area ID specified, the command displays information
about all configured sham links.
Related command: sham-link.
Example # Display information about all OSPF sham links.
<Sysname> display ospf sham-link
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area RouterId Source-IP Destination-IP State Cost
0.0.0.1 100.1.1.2 3.3.3.3 5.5.5.5 P-2-P 10
Table 458 Description on the fields of display ip vpn-instance instance-name
Field Description
VPN-Instance Name and ID Name and ID of the VPN instance
CreateTime Time when the VPN instance was created
Up time Duration of the VPN instance
Route Distinguisher RD of the VPN instance
Export VPN Targets Export target attribute of the VPN instance
Import VPN Targets Import target attribute of the VPN instance
Import Route Policy Import routing policy of the VPN instance
Description Description of the VPN instance
Maximum number of Routes Maximum number of routes of the VPN instance
Interfaces Interface to which the VPN instance is bound
Table 459 Description on the fields of the display ospf sham-link command
Field Description
Area OSPF area to which the sham link belongs