Filter
Top Products
790 CHAPTER 60: IP PERFORMANCE CONFIGURATION COMMANDS
Description Use the display fib statistics command to display statistics about the FIB
entries.
Example # Display statistics about the FIB entries.
<Sysname> display fib statistics
Route Entry Count : 2
display icmp statistics
Syntax display icmp statistics
View Any view
Parameter None
Description Use the
display icmp statistics command to display ICMP statistics.
Related command: display ip interface and reset ip statistics.
Example # Display ICMP statistics.
<Sysname> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
Table 157 Description on the fields of the display fib statistics command
Field Description
Route Entry Count Number of FIB entries
Table 158 Description on the fields of the display icmp statistics command
Field Description
bad formats Number of input wrong format packets
bad checksum Number of input wrong checksum packets
echo Number of input/output echo packets
destination unreachable Number of input/output destination unreachable packets
source quench Number of input/output source quench packets
redirects Number of input/output redirection packets
echo reply Number of input/output replies