Filter
Top Products
296 CHAPTER 19: ATM CONFIGURATION COMMANDS
display atm pvc-group
Syntax display atm pvc-group [ interface interface-type interface-number [ pvc { pvc-name
[ vpi/vci ] | vpi/vci }]]
View Any view
Parameter interface-type interface-number: Interface type and interface number.
pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For
example, the name 1/20 is not allowed.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0
to 255. VCI is short for virtual channel identifier; its value range varies by interface
type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are
not recommended to use them. For details regarding the value range, refer to
Table 28.
Description Use the
display atm pvc-group command to view the information about
PVC-Group.
Note that:
■ If no interface is specified, the system displays PVC-Group information on all
ATM interfaces.
■ If the PVC name or the VPI/VCI value pair is not specified, the system displays
information of all PVC-Groups on the specified ATM interface.
Example # Display the information about PVC-Group on all ATM interfaces.
<Sysname> display atm pvc-group
VPI/VCI PVC-NAME STATE ENCAP PROT INTERFACE GROUP
1/32 aa UP SNAP IP Atm11/0(UP) 1/32
1/33 UP SNAP IP Atm11/0(UP) 1/32
3/34 UP SNAP IP Atm11/0(UP) 1/32
IP & Mask Protocol type
State UP Map entry state
100.11.1.1, mask 255.255.0.0 Protocol address
Vlink 1 Virtual link number
Table 25 Description on the fields of the display atm map-info command
Field Description
Table 26 Description on the fields of the display atm pvc-group command
Field Description
VPI/VCI VPI/VCI value pair
PVC-NAME PVC name
STATE PVC state