Filter
Top Products
1120 CHAPTER 76: OSPF CONFIGURATION COMMANDS
display ospf interface
Syntax display ospf [ process-id ] interface [ all | interface-type interface-number ]
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
all: Display OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Description Use the
display ospf interface command to display OSPF interface information.
If no OSPF process is specified, OSPF interface information of all OSPF processes is
displayed.
Examples # Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
LS ACK: Unknown LSA type LSAck packets with unknown LSA type
LS REQ: Empty request LSR packets with no request information
LS REQ: Bad request Bad LSR packets
LS UPD: LSA checksum bad LSU packets with wrong LSA checksum
LS UPD: Received less recent LSA LSU packets without latest LSA
LS UPD: Unknown LSA type LSU packets with unknown LSA type
Table 266 Description on the fields of the display ospf error command
Field Description
Table 267 Description on the fields of the display ospf interface command
Field Description
Area Area ID of the interface
IP address Interface IP address (regardless of whether TE is enabled or not)
Type Interface network type: PTP, PTMP, Broadcast, or NBMA
State Interface state defined by interface state machine: DOWN, Waiting, p-2-p,
DR, BDR, or DROther
Cost Interface cost
Pri Router priority