Filter
Top Products
2047
undo certificate request polling { count | interval }
View PKI domain view
Parameter count: Maximum number of attempts to poll the status of the certificate request,
in the range 1 to 100.
minutes: Polling interval, in the range 5 to 168 minutes.
Description Use the
certificate request polling command to specify the certificate request
polling interval and maximum number of attempts.
Use the
undo certificate request polling command to restore the defaults.
By default, the polling is executed once every 20 minutes for up to 50 times.
After an applicant makes a certificate request, the CA may need a long period of
time if it verifies the certificate request manually. During this period, the applicant
needs to query the status of the request periodically to get the certificate as soon
as possible after the certificate is signed.
Related command: display pki certificate.
Example # Specify the polling interval as 15 minutes and the maximum number of attempts
as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40
certificate request url
Syntax certificate request url url-string
undo certificate request url
View PKI domain view
Parameter url-string: URL of the server for certificate request, a case-insensitive string of 1 to
127 characters. It comprises the location of the server and the location of CGI
command interface script in the format of http:
//server_location/ca_script_location, where server_location is generally expressed
in IP address.
Description Use the
certificate request url command to specify the URL of the RA server
that the device makes a certificate request through SCEP.
Use the
undo certificate request url command to remove the configuration.
By default, no URL is specified for a PKI domain.