Filter
Top Products
1004 CHAPTER 72: BGP CONFIGURATION COMMANDS
Description Use the peer route-update-interval command to specify the interval for
sending the same update to a peer/peer group.
Use the
undo peer route-update-interval command to restore the default
value.
By default, the interval is 5 seconds for IBGP peers, and 30 seconds for EBGP
peers.
Examples # In BGP view, specify the interval for sending the same update to peer group test
as 10 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test as-number 100
[Sysname-bgp] peer test route-update-interval 10
# In BGP-VPN instance view, specify the interval for sending the same update to
peer group test as 10 seconds (the VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer test as-number 100
[Sysname-bgp-vpn1] peer test route-update-interval 10
peer substitute-as (BGP/BGP-VPN instance view)
Syntax peer { group-name | ip-address } substitute-as
undo peer { group-name | ip-address } substitute-as
View BGP view/BGP-VPN instance view
Parameters group-name: Name of a peer group, a sting of 1 to 47 characters.
ip-address: IP address of a peer.
Description Use the
peer substitute-as command to replace the AS number of a peer/peer
group in the AS_PATH attribute with the local AS number.
Use the
undo peer substitute-as command to remove the configuration.
No AS number is replaced by default.
Examples # In BGP view, substitute local AS number for AS number of peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 substitute-as
# In BGP-VPN instance view, substitute local AS number for AS number of peer
1.1.1.1 (the VPN has been created).