Filter
Top Products
2228 CHAPTER 146: IPV4-BASED VRRP CONFIGURATION COMMANDS
reset vrrp statistics
Syntax reset vrrp statistics [ interface interface-type interface-number [ vrid
virtual-router-id ]]
View User view
Parameter interface interface-type interface-number: Clears VRRP statistics of a specified
interface. interface-type interface-number specifies an interface by its type and
number.
vrid virtual-router-id: Clears VRRP statistics of the specified standby group.
virtual-router-id specifies a standby group by its group number, in the range 1 to
255.
Description Use the
reset vrrp statistics command to clear VRRP statistics.
If you specify both the interface and standby group, the statistics about the
specified standby group on the specified interface are cleared; if you specify only
the interface, the statistics about all the standby groups on the interface are
cleared; if you specify neither, the statistics about all the standby groups on the
device are cleared.
Example # Clear the statistics about all the standby groups on the device.
<Sysname> reset vrrp statistics
vrrp vrid authentication-mode
Syntax vrrp vrid virtual-router-id authentication-mode { md5 | simple } key
undo vrrp vrid virtual-router-id authentication-mode
Auth Type Mismatch Number of packets with authentication failures due to
mismatching authentication types
Packet Length Errors Number of packets with VRRP packet length errors
Address List Errors Number of packets with virtual IP address list errors
Become Master Number of times that the router worked as the master
Priority Zero Pkts Rcvd Number of received advertisements with the priority of 0
Advertise Rcvd Number of received advertisements
Advertise Sent Number of advertisements sent
Global statistics Statistics about all standby groups
CheckSum Errors Total number of packets with checksum errors
Version Errors Total number of packets with version errors
VRID Errors Total number of packets with VRID errors
Table 589 Description on the fields of the display vrrp statistics command
Field Description