Filter
Top Products
2471
1234567 for example. A cipher text password, or the encrypted version of the
plain text password, comprises 24 characters, such as
_(TT8F]Y5SQ=^Q‘MAF4<1!!.
Description Use the
set authentication password command to set a local authentication
password.
Use the
undo set authentication password command to remove the local
authentication password.
No local authentication password is set by default.
■ When setting a password, you should specify simple to save it in plain text in
the configuration file, or specify cipher to save it in cipher text.
■ Whether the password format is plain text or cipher text, you must type in plain
text password at authentication.
■ Plain text password easily gets cracked. Therefore, you are recommended to
use cipher text password.
Related command: authentication-mode.
Example # Set the local authentication password for the user interface Console 0 to hello.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] authentication-mode password
[Sysname-ui-console0] set authentication password cipher hello
After setting the password, you will be required to input the password next time
you enter the system.
shell
Syntax shell
undo shell
View User interface view
Parameter None
Description Use the
shell command to enable terminal services on the user interface.
Use the
undo shell command to disable this function.
By default, terminal services are enabled on all user interfaces.
There are a few restrictions on using the undo shell command:
■ This command is not supported on the Console port.