Filter
Top Products
1945
undo service-type ppp [ call-number | callback-nocheck | callback-number ]
View Local user view
Parameter call-number call-number: Specifies a caller number for ISDN user authentication,
which is a string of 1 to 64 characters.
[: subcall-number ]: Specifies the sub-caller number. The total length of the caller
number and the sub-caller number must be less than 62 characters.
callback-nocheck: Enables the PPP user callback without authentication feature.
callback-number callback-number: Specifies a callback number, which is a string
of 1 to 64 characters.
Description Use the
service-type ppp command to authorize a user to use the PPP service
and configure the callback attribute and caller number of the user.
Use the
undo service-type ppp command to restore their default settings.
By default, no service is authorized to a user; if the PPP service is authorized,
callback without authentication is enabled, no callback number is specified, and
the system does not authenticate the caller number of ISDN users.
Related command: service-type and service-type ftp.
Example # Authorize user user1 to use the PPP service and enable the callback without
authentication feature.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type ppp callback-nocheck
state
Syntax state { active | block }
View ISP domain view/local user view
Parameter active: Places the current ISP domain or local user in the active state, allowing the
users in the current ISP domain or the current local user to request network
services.
block: Places the current ISP domain or local user in the blocked state, preventing
users in the current ISP domain or the current local user from requesting network
services.
Description Use the
state command to configure the status of the current ISP domain or local
user.