Filter
Top Products
937
Use the display ip routing-table ip-address1 { mask-length | mask } ip-address2
{ mask-length | mask } command to display route entries with destination
addresses within a specified range.
Examples # Display route entries for the destination IP address 11.1.1.1.
[Sysname] display ip routing-table 11.1.1.1
Routing Table : Public
Summary Count : 4
Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/0 Static 60 0 0.0.0.0 NULL0
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
For detailed description about the output, see Table 204.
# Display route entries by specifying a destination IP address and the
longer-match keyword.
[Sysname] display ip routing-table 11.1.1.1 longer-match
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and mask.
[Sysname] display ip routing-table 11.1.1.1 24
Routing Table : Public
Summary Count : 3
Destination/Mask Proto Pre Cost NextHop Interface
11.0.0.0/8 Static 60 0 0.0.0.0 NULL0
11.1.0.0/16 Static 60 0 0.0.0.0 NULL0
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
# Display route entries by specifying a destination IP address and mask and the
longer-match keyword.
[Sysname] display ip routing-table 11.1.1.1 24 longer-match
Routing Table : Public
Summary Count : 1
Destination/Mask Proto Pre Cost NextHop Interface
11.1.1.0/24 Static 60 0 0.0.0.0 NULL0
For detailed description of the above output, see Table 204.
# Display route entries for destination addresses in the range 1.1.1.0 to 5.5.5.0.
<Sysname> display ip routing-table 1.1.1.0 24 5.5.5.0 24
Routing Table : Public
Destination/Mask Proto Pre Cost NextHop Interface