Filter
Top Products
2732 CHAPTER 180: VOICE RADIUS CONFIGURATION COMMANDS
display voice call-history-record
Syntax display voice call-history-record { all | callednumber called-number |
callingnumber calling-number | cardnumber card-number | last last-number | line
line-number | remote-ip-addr ip-address }
View Any view
Parameter all: Displays all call records.
callednumber called-number: Displays call records by called number. The
called-number argument is a string of up to 31 characters, consisting of digits 0
through 9 and the asterisk *.
callingnumber calling-number: Displays call records by calling number. The
calling-number argument is a string of up to 31 characters, consisting of digits 0
through 9 and the asterisk *.
card card-number: Displays call records by prepaid card number. The card-number
argument is a string of up to 31 characters.
last last-number: Displays the specified number of latest call records. The
last-number argument ranges from 1 to 500.
line line-number: Displays incoming or outgoing call records by voice subscriber
line of the voice gateway. The value range of the line-number argument varies
with devices.
remote-ip-addr ip-address: Displays call records by callee’s IP address. The
ip-address argument represents a callee’s IP address.
Description Use the
display voice call-history-record command to display voice RADIUS
call records.
If the ip-address argument is specified, the system displays call records by callee’s
IP address. If the last-number argument is specified, the voice gateway displays the
specified number of latest call records, and if a value greater than the number of
actual call records is specified, the voice gateway will display all call records.
password digit Number of digits in a password, displayed only in the card
number/password process.
See “password-digit” on page 2737.
redialing times Number of redial attempts, displayed in the card number/password
process or caller number process with IVR.
See “redialtimes” on page 2740.
language selected Language selection function, Chinese and English available,
displayed only in the caller number process with IVR.
See “selectlanguage” on page 2741.
Table 701 Description on fields of the display voice access-number command
Field Description