Filter
Top Products
1289
display ospfv3 peer statistic
Syntax display ospfv3 peer statistic
View Any view
Parameters None
Description Use the
display ospfv3 peer statistic command to display information about
all OSPFv3 neighbors on the router, that is, numbers of neighbors in different
states.
Examples # Display information about all OSPFv3 neighbors.
<Sysname> display ospfv3 peer statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
Neighbor Statistics
----------------------------------------------------------------------
Area ID Down Init 2-way ExStar Exchange Loading Full
0.0.0.0 0 0 0 0 0 0 1
Total 0 0 0 0 0 0 1
display ospfv3 request-list
Syntax display ospfv3 [ process-id ] request-list [ statistics ]
View Any view
Parameters process-id: OSPFv3 process ID, in the range 1 to 65535.
statistics: Statistics of link state request list.
Table 306 Description on the fields of the display ospfv3 peer statistic command
Field Description
Area ID Area ID
Down In this state, neighbor initial state, the router has not received any
information from a neighboring router for a period of time.
Init In this state, the router received a Hello packet from the neighbor but the
packet gives no ID of the router. Mutual communication is not available.
2-Way Indicates mutual communication between the router and its neighbor is
available. DR/BDR election is finished under this state (or higher).
ExStart In this state, the router decides on the initial DD sequence number and
master/slave relationship of the two parties.
Exchange In this state, the router exchanges DD packets with the neighbor.
Loading In this state, the router send LSRs to request the neighbor for needed LSAs.
Full Indicates LSDB synchronization has been accomplished between neighbors.
Total Total number of neighbors under the same state