Filter
Top Products
2340 CHAPTER 154: SNMP CONFIGURATION COMMANDS
set-operation: Enables logging of SNMP SET operation.
Description Use the
snmp-agent log command to enable SNMP logging.
Use the undo snmp-agent log command to restore the default.
By default, SNMP logging is disabled.
If a specified SNMP logging is enabled, when NMS performs a specified operation
to SNMP Agent, the latter records the operation-related information and saves it
to the information center.
Example # Enable logging of SNMP GET operation.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging of SNMP SET operation.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
snmp-agent mib-view
Syntax snmp-agent mib-view { excluded | included } view-name oid-tree [ mask
mask-value ]
undo snmp-agent mib-view view-name
View System view
Parameter excluded: Indicates that not all nodes of the MIB tree are included in current view.
included: Indicates that all nodes of the MIB tree are included in current view.
view-name: View name, a string of 1 to 32 characters.
oid-tree: MIB subtree. It can only be an OID string, such as 1.4.5.3.1, or an object
name string, such as “system”. OID is made up of a series of integers, which
marks the position of the node in the MIB tree and uniquely identifies a MIB
object.
mask mask-value: Mask for an object tree, in the range 1 to 32 hexadecimal
digits. It must be an even digit.
Description Use the
snmp-agent mib-view command to create or update MIB view
information so that MIB objects can be specified.
Use the
undo snmp-agent mib-view command to delete the current
configuration.
By default, MIB view name is ViewDefault.