Filter
Top Products
1953
display radius statistics
Syntax display radius statistics
View Any view
Parameter None
Description Use the
display radius statistics command to display statistics about RADIUS
packets.
Related command: radius scheme.
Example # Display statistics about RADIUS packets.
<Sysname> display radius statistics
state statistic(total=1024):
DEAD= = 1024 AuthProc= = 0 AuthSucc= = 0
AcctStart= = 0 RLTSend= = 0 RLTWait= = 0
Primary Auth IP/ Port/ State IP address/access port number/current status of the primary
authentication server: (active or block)
Primary Acct IP/ Port/ State IP address/access port number/current status of the primary
accounting server: (active or block)
Second Auth IP/ Port/ State IP address/access port number/current status of the
secondary authentication server: (active or block)
Second Acct IP/ Port/ State IP address/access port number/current status of the
secondary accounting server: (active or block)
Auth Server Encryption Key Shared key of the authentication server
Acct Server Encryption Key Shared key of the accounting server
Accounting-On packet disable The accounting-on function is disabled
send times Retransmission times of accounting-on packets
interval Interval to retransmit accounting-on packets
Interval for timeout(second) Timeout time in seconds
Retransmission times for timeout Times of retransmission in case of timeout
Interval for realtime
accounting(minute)
Interval for realtime accounting in minutes
Retransmission times of
realtime-accounting packet
Retransmission times of realtime-accounting packet
Retransmission times of
stop-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min) Quiet interval for the primary server
Username format Format of the username
Data flow unit Unit of data flows
Packet unit Unit of packets
Total 1 RADIUS scheme(s) 1 RADIUS scheme in total
Table 510 Description on the fields of the display radius scheme command
Field Description