Filter
Top Products
1096 CHAPTER 75: IS-IS DEBUGGING COMMANDS
Table 253 Description on the fields of the debugging isis receiving-packet-content
command
Field Description
Rxed pduLevel CSNP From sourceId
(circuitName).
IS-IS received a CSNP packet.
pduLevel: L1 or L2.
sourceId: Source NSAP address of the CSNP
packet.
circuitName: Name of the interface through
which the CSNP packet was received.
** ** ** ** ** ** ** ** ** ** ** ** ** **
** **
Contents in the CSNP packet, including the
header, LSP entries, and Authentication
Information field.
Rxed pduLevel PSNP From sourceId
(circuitName).
IS-IS received a PSNP packet.
pduLevel: L1 or L2.
sourceId: Source NSAP address of the PSNP
packet.
circuitName: Name of the interface through
which the PSNP packet was received.
** ** ** ** ** ** ** ** ** ** ** ** ** **
** **
Contents in the corresponding PSNP packet,
including the header, LSP entries, and
Authentication Information field.
Table 254 Description on the fields of the debugging isis self-originate-update command
Field Description
UPDT: RESET REQUIRED. The IS-IS process needs to be reset.
UPDT: Circuit IPv4/IPv6 Up circName Local interface is up (IPv4/IPv6).
circName: Interface name.
UPDT: Circuit IPv4/IPv6 Down circName Local interface is down (IPv4/IPv6).
circName: Interface name
UPDT: Circuit Cost change process failed Changing the local interface cost failed.
UPDT: Circuit Ipv4/v6 Addr add ipAddress The IPv4/IPv6 address was added to the
interface.
ipAddress: Interface IP address.
UPDT: Circuit Ipv4/v6 Addr Del ipAddress The IPv4/IPv6 address was deleted from the
interface.
ipAddress: Interface IP address.
UPDT: Rxed levelType Default cost Change The default cost of the local interface
changed.
levelType: Interface level type, which can be
L1 or L2.
INTELLITMR: Starting a lspLevel LSP Timer for
LSP Generation.
IS-IS started the LSP generation timer.
lspLevel: LSP type, which can be L1 or L2.
UPDT: Filling of Auth data in Lsp failed Filling authentication information in the locally
originated LSP failed.
UPDT: Creation of Zero lsp Desc failed Creating local zero LSP fragment failed.
UPDT: Adding Ipv4/v6 Address ipAddress into
pduLevel LSPs
The IP address was being added to the local
LSPs.
UPDT: Adding in the LSP Neighbor option, TLV
22
The neighbor TLV was added to the local LSP.