Filter
Top Products
1576 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
display mpls rsvp-te peer
Syntax display mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin |
include | exclude } regular-expression ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls rsvp-te peer command to display information about
RSVP-TE neighbors on the specified or all interfaces.
Example # Display information about RSVP-TE neighbors on all interfaces.
<Sysname> display mpls rsvp-te peer
Interface Ethernet1/0
Neighbor Addr: 80.4.1.1
SrcInstance: 841 NbrSrcInstance: 928
PSB Count: 0 RSB Count: 1
Hello Type Sent: ACK Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Ready
Restart Time: 200 sec Recovery Time: 150 sec
Interface Ethernet1/1
Neighbor Addr: 80.2.1.1
SrcInstance: 832 NbrSrcInstance: 920
PSB Count: 1 RSB Count: 0
Hello Type Sent: REQ Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Not ready
Restart Time: --- Recovery Time: ---
Table 397 Description on the fields of the display mpls rsvp-te peer command
Field Description
Interface Ethernet1/0 RSVP-TE enabled Ethernet interface
Neighbor Addr: Neighbor address, in the format of X.X.X.X.
SrcInstance Instance of source Message ID
NbrSrcInstance Instance of neighbor Message ID
PSB Count Number of path state blocks