Filter
Top Products
2157
Description Use the display ike proposal command to display the settings of all IKE
proposals.
This command displays the configuration information of all IKE proposals in the
descending order of proposal priorities.
Related command: authentication-method on page 1721, ike proposal, encryption-algorithm
on page 1725, authentication-algorithm on page 1721, dh, sa duration.
Example # Display the settings of IKE proposals.
<Sysname> display ike proposal
priority authentication authentication encryption Diffie-Hellman duration
method algorithm algorithm group (seconds)
--------------------------------------------------------------------------
10 PRE_SHARED SHA DES_CBC MODP_1024 5000
11 PRE_SHARED MD5 DES_CBC MODP_768 50000
default PRE_SHARED SHA DES_CBC MODP_768 86400
display ike sa
Syntax display ike sa [ verbose [ connection-id connection-id | remote-address
remote-address ]]
View Any view
Parameter verbose: Displays detailed information.
connection-id: Displays detailed information about IKE SAs by connection ID, in
the range 1 to 2000000000.
remote-address: Displays detailed information about IKE SAs by remote address.
Description Use the
display ike sa command to display information about the current IKE
SAs.
Note that the command displays brief information about the current IKE SAs if you
specify no parameters or keywords.
Related command: ike proposal, ike peer (system view).
Table 571 Description on the fields of the display ike proposal command
Field Description
priority Priority of the IKE proposal
authentication method Authentication method used by the IKE proposal
authentication algorithm Authentication algorithm used by the IKE proposal
encryption algorithm Encryption algorithm used by the IKE proposal
Diffie-Hellman group DH group used in IKE negotiation in phase 1
duration (seconds) ISAKMP SA lifetime of the IKE proposal in seconds