Filter
Top Products
2419
**************************************************************************
* All rights reserved (2004-2006) *
* Without the owner’s prior written consent, *
* No decompiling or reverse-switch fabricering shall be allowed. *
**************************************************************************
Welcome to legal(header legal)
Press Y or ENTER to continue, N to exit.
Welcome to motd(header motd)
Welcome to login(header login)
Login authentication
Password:
Welcome to shell(header shell)
<Sysname>
hotkey
Syntax hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
View System view
Parameter CTRL_G: Assigns the hot key <Ctrl+G> to a command.
CTRL_L: Assigns the hot key <Ctrl+L> to a command.
CTRL_O: Assigns the hot key <Ctrl+O> to a command.
CTRL_T: Assigns the hot key <Ctrl+T> to a command.
CTRL_U: Assigns the hot key <Ctrl+U> to a command.
command: The command line associated with the hot key.
Description Use the
hotkey command to assign a hot key to a command line.
Use the undo hotkey command to restore the default.
By default, the system specifies corresponding commands for <Ctrl+G>, <Ctrl+L>
and <Ctrl+O>, while the others are null.
■ <Ctrl+G> corresponds to display current-configuration
■ <Ctrl+L> corresponds to display ip routing-table
■ <Ctrl+O> corresponds to undo debugging all
You can customize this scheme as needed however.
Example # Assign the hot key <Ctrl+T> to the display tcp status command.