Filter
Top Products
401
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr nonstandard
link-protocol fr mfr
Syntax link-protocol fr mfr interface-number
View Interface view
Parameter interface-number: MFR interface number, in the range 0 to 1023.
Description Use the
link-protocol fr mfr command to configure the current physical
interface as an MFR bundle link and bind it to an MFR interface.
By default, an interface is not bound to any MFR interface.
Note that:
■ When this command is configured, the specified MFR interface must exist. A
maximum of 16 physical interfaces can be bundled onto an MFR interface.
■ To delete a physical interface from an MFR interface, use the link-protocol
command to apply a link layer protocol of non frame relay MFR to the
interface.
■ After a physical interface is encapsulated as MFR format, the interface belongs
to MFR and is not allowed to be configured using the commands related to FR
except MFR. In addition, the queue type on the interface can be configured as
FIFO (first in first out) only even if the other queue types have been
encapsulated on the interface, they would be converted to FIFO type by force.
Example # Configure Serial 2/0 as a bundle link and add it onto the Frame Relay bundle
interface MFR4.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] link-protocol fr mfr 4
mfr bundle-name
Syntax mfr bundle-name [ name ]
undo mfr bundle-name
View MFR interface view
Parameter name: Bundle identification, a string of 1 to 49 characters.
Description Use the
mfr bundle-name command to set frame relay bundle identification
(BID).