Filter
Top Products
1111
undo default { cost | limit | tag | type } *
View OSPF view
Parameters cost: Specifies the default cost for redistributed routes, in the range 0 to
16777214.
limit: Specifies the default upper limit of routes redistributed per time, in the range
1 to 2147483647.
tag: Specifies the default tag for redistributed routes, in the range 0 to
4294967295.
type: Specifies the default type for redistributed routes: 1 or 2.
Description Use the
default command to configure default parameters for redistributed
routes: cost, route type (Type1 or Type2), tag, and the upper limit.
Use the
undo default command to restore default values.
The cost, route type, tag, and the upper limit are 1, 2, 1 and 1000 by default.
Related commands: import-route (OSPF view).
Examples # Configure default parameters cost as 10, upper limit as 20000, tag as 100 and
type as 2 for redistributed external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2
default-cost (OSPF area view)
Syntax default-cost cost
undo default-cost
View OSPF area view
Parameters cost: Specifies a cost for the default route advertised to the Stub or NSSA area, in
the range 0 to 16777214.
Description Use the
default-cost command to specify a cost for the default route advertised
to the stub or NSSA area.
Use the
undo default-cost command to restore the default value.
The cost defaults to 1.
This command is only applicable to the ABR of a stub area or the ABR/ASBR of an
NSSA area.