Filter
Top Products
2409
After the configuration takes effect, use the display clock command to view the
result. The information such as log file and debug adopts the local time modified
by time-zone and daylight saving time.
Related command: clock datetime, clock summer-time one-off, clock summer-time repeating,
display clock.
Example # Set the name of the local time zone to Z5, five hours ahead of UTC time.
<Sysname> clock timezone z5 add 5
command-privilege
Syntax command-privilege level level view view command
undo command-privilege view view command
View System view
Parameter level level: Specifies a command level in the range 0 to 3.
view view: Specifies a view.
command: Command to be set in the specified view.
Description Use the
command-privilege command to assign a level for the commands in
the specified view.
Use the
undo command-privilege view command to restore the default.
By default, the commands under each view have their respective command levels.
Generally, do not modify the default command levels to avoid inconvenience to
your maintenance and operation.
Command privilege falls into four levels: visit, monitor, system, and manage,
which are identified by 0 through 3.
The administrator can assign a privilege level for a user according to his need.
When the user logs on a device, the commands available depend on the user’s
privilege. For example, if a user’s privilege is 3 and the command privilege of VTY 0
user interface is 1, and the user logs on the system from VTY 0, he can use all the
commands with privilege smaller than three (inclusive).
The following table describes the default level of the commands.
Table 622 Default level of the commands
Command level Commands
Visit (0) ping, tracert, telnet
Monitor (1) refresh, reset, send
System (2) Configuration commands