Filter
Top Products
1055
osi: Specifies to check the OSI related fields in a LSP.
Whether a password should use ip or osi is not affected by the actual network
environment.
Description Use the domain-authentication-mode command to configure the routing
domain authentication mode to insert the area authentication password into all
the sent level-2 packets (LSP, CSNP, and PSNP) in the predefined way and verify the
authentication password of the received level-2 pockets.
Use the
undo domain-authentication-mode command to cancel the routing
domain authentication mode configuration.
By default, no routing domain authentication mode is configured in the system;
that is, the system authenticates no level-2 packets received and is configured with
no password.
Related commands: area-authentication-mode, isis authentication-mode.
Examples # Use the simple mode and password “123456” to authenticate level-2 routing
packets.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] domain-authentication-mode simple 123456
filter-policy export (IS-IS view)
Syntax filter-policy { acl-number | ip-prefix ip-prefix-name | route-policy
route-policy-name } export [ isis process-id | ospf process-id | rip process-id | bgp |
direct | static]
undo filter-policy export [ isis process-id | ospf process-id | rip process-id | bgp |
direct | static]
View IS-IS view
Parameters acl-number: Specifies the number of an ACL that is used to filter outgoing
redistributed routes, ranging from 2000 to 3999.
ip-prefix ip-prefix-name: Specifies the name of an IP prefix list that is used to filter
outgoing redistributed routes, a string of 1 to 19 characters.
route-policy route-policy-name: Specifies the name of a routing policy that is
used to filter outgoing redistributed routes, a string of 1 to 19 characters.
isis process-id: Filters outgoing routes redistributed from an IS-IS process. The
process ID is in the range of 1 to 65535.
ospf process-id: Filters outgoing routes redistributed from an OSPF process. The
process ID is in the range of 1 to 65535.