Filter
Top Products
484 CHAPTER 28: LINK AGGREGATION DEBUGGING COMMANDS
Examples # Enable debugging for LACP protocol packets on Ethernet 1/1 to view the
information about LACP protocol packet sending/receiving of the port.
Actor Local port information carried in the protocol
packet, which contains the following fields.
■ tlv: A value of 1 indicates that the
information is about the local port.
■ len: The length of the Actor information.
■ sys-pri: The LACP priority of the system
where the local port resides.
■ sys-mac: The system MAC address of the
system where the local port resides.
■ key: The value of the operation key of the
local port.
■ pri: The LACP priority of the local port.
■ p: The local port number.
■ state: The current LACP state of the local
port.
Partner Peer port information carried in the protocol
packet, which contains the following fields.
■ tlv: A value of 2 indicates that the
information is about the peer port.
■ len: The length of the Partner information.
■ sys-pri: The LACP priority of the system
where the peer port resides.
■ sys-mac: The system MAC address of the
system where the peer port resides.
■ key: The value of the operation key of the
peer port.
■ pri: The LACP priority of the peer port.
■ p: The peer port number.
■ state: The current LACP state of the peer
port.
Collector The content of the Collector field carried in
the protocol packet, which contains the
following fields.
■ tlv: A value of 3 indicates the Collector
field.
■ len: The length of the Collector field.
■ col-max-delay: The maximum delay.
Terminator The content of the Terminator field carried in
the protocol packet, which contains the
following fields.
■ tlv: A value of 0 indicates the Terminator
field, which marks the end of the protocol
packet.
■ len: The length of the Terminator field.
Table 76 Description on the fields of the debugging lacp packet command
Field Description