Filter
Top Products
2533
display ipx routing-table verbose
Syntax display ipx routing-table [ network ] verbose
View Any view
Parameter Network: Displays detailed routing information for the network, including both
active and inactive routes.
Description Use the
display ipx routing-table verbose command to display detailed IPX
routing information, including active and inactive routes.
If no network is specified, all detailed IPX routing information is displayed.
Example # Display all detailed IPX routing information, including active and inactive routes.
<Sysname> display ipx routing-table verbose
Routing tables:
Destinations: 2 Routes: 3
Destination Network ID: 0x1
Protocol: Direct Preference: 0
Ticks: 1 Hops: 0
Nexthop: 0.0000-0000-0000 Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Protocol: Static Preference: -60
Ticks: 1 Hops: 1
Nexthop: 2.000e-0001-0000 Time: 0
Interface: 2.0020-9c68-448f(Vlan-interface2)
State: <Inactive>
Destination Network ID: 0x2
Protocol: Static Preference: 60
Ticks: 1 Hops: 1
Nexthop: 1.000e-0001-0000 Time: 0
Interface: 1.0020-9c68-448e(Vlan-interface1)
State: <Active>
Table 659 Description on the fields of the display ipx routing-table command
Field Description
Dest_Ntwk_ID Destination network ID of the route
Proto Protocol type of the route
Pre Preference of the route
Ticks Delay time of the route in ticks (a tick is 1/18 second)
Hops Hop value of the route
Nexthop The next hop of the route
Interface Outgoing interface of the route
Table 660 Description on the fields of the display ipx routing-table verbose command
Field Description
Destinations Total number of destinations