Filter
Top Products
2024 CHAPTER 133: NAT CONFIGURATION COMMANDS
Parameter None
Description Use the
display nat log command to view the NAT log configuration.
Example # View the NAT log configuration.
<Sysname> display nat log
NAT log information:
log enable : enable acl 2000
flow-begin : enable
flow-active : 10(minutes)
display nat outbound
Syntax display nat outbound
View Any view
Parameter None
Description Use the
display nat outbound command to display the address translation
information.
Example # Display the NAT address translation information.
<Sysname> display nat outbound
NAT outbound information:
There are currently 2 nat outbound rule(s)
Ethernet1/0: acl(2001) --- NAT address-group(1) [no-pat]
Ethernet1/1: acl(2002) --- interface
Table 527 Description on the fields of the display nat log command:
Field Description
NAT log information : NAT log configuration
log enable : enable acl 2000 Logging data flows matching acl 2000.
flow-begin : enable Logging newly established sessions
flow-active : 10(minutes) Interval in logging active flows (10 minutes)
Table 528 Description on the fields of the display nat outbound command
Field Description
NAT outbound information: Display configured NAT address translation
information
Ethernet1/0: acl(2001) --- NAT
address-group(1) [no-pat]
ACL 2001 is associated with address pool 1 on
interface Ethernet 1/0 to provide many-to-many
NAT. [no-pat] indicates that port address is not
translated.
Ethernet1/1: acl(2002) --- interface ACL 2002 is associated with interface Ethernet 1/1
to implement Easy IP